close

Benvenuto sul nuovo Giramondo. Qui continuerai a trovare le esperienze di viaggio di tutti i Giramondini, mentre il forum si è spostato su Facebook. Chiedi subito di farne parte! Clicca qui

Hot Sale At Prices 32 Pieces Sublimation Patch Blanks 4 Shapes Iron-on Hat Patch Fa Shop Online

Hot Sale At Prices 32 Pieces Sublimation Patch Blanks 4 Shapes Iron-on Hat Patch Fa Shop Online our website is the only official online portal . BORDAN Plug Play Spare Tire Brake Light Third Brake Light Whee This fits your . Make sure this fits by entering your model number. 【Plug amp; Play】Easy to install, just plug and play, no need to splice the existing brake light wires. No broken wire installation. You can install the third spare light in few minutes. 【Compatible with】Fits 2007-2018 JK JKU YJ TJ with all 16 to 20 inch rim diameter wheels, works with 5x5, 5x4.5, 5x5.5 inch lug patterns. Led Spare Tire Decoration, Brake Light. 【High Quality】Wrangler 3rd brake light, red Light Color, 5W Led, 13.8 Inch Diameter, durable polypropylene mounting plate, black color nice surface finish. 85 PCS LEDs; waterproof rate: IP67; long Life: more than 30000Hours; voltage: 12V. 【Braking Function】Obvious and fast braking warning signal, lights up the inside of your spare when step on the brake, more red brightness and stronger penetration, easy To Be Seen. Looks great and adds more safety. If you tired of your standard brake light, got this kit. 【Package Included】1 Pcs spare tire brake light(Plugamp; Play)+instruction included. If you have any quetions about the products, please feel free to contact us. Product Description Product Name: Spare Tire Brake Light Brand: BORDAN Housing Material: ABS Wattage/Voltage: 5W/12V Life Span: gt;30000Hours Product Diameter: 13.8 inch(350mm*350mm*23mm) Color of Light: Red Usage: Spare tire wheel brake light Placement on vehicle: Rear BORDAN Spare Tire Brake Light,built in 85 pcs LEDs, with obvious And Fast Braking Warning Signal,lights up the inside of your spare when step on the brake, more red brightness and stronger penetration, easy to be seen. looks great and adds more safety. Fitment: Fits 2007-2017 Offroad Fits 16"+ Rims, may fit some 15" rims. Fits with 5" X 4.5" and 5" X 5" wheel hubs JL Headlight Assembly JL Spare Tire Brake Light JK Smoked LED Tail Lights JL Door Footrest Pegs Pedal JK Tailgate JK Limb Risers Kit Fitment For 2018+JL For JLU 2018 2019 For 2007-2017 Wrangler JK For JL JLU 2018 2019 For 2007-2017 Wrangler JK For 2007-2017 Wrangler JK No Tax Installed this for my girlfriend, should have removed it when we broke up. Bright, easy to install.10/10 for making me realize that I wasted 2 years on my exI receiving the product very fast. I unboxed it, it was packed well I don't think it could get damaged in shipping unless the smash the box. The light was as described in the information provided. The wires were already partially stripped, which is nice, I added in electrical connectors plugged it in and it worked like a charm. The holes lined up perfectly with my JK bolt pattern. This was an easy and fast modification. I plan to do one mod to the design and that is to add a nut and washer onto the lugs between the wheel and this light so that it stays on when I pull the spare wheel off, could also use keeper washers if desired. I've had it installed for about 6 months now and haven't had any problems. I modified it slightly to accommodate a rearview camera. Had to make it so that the wire didn't get pinched. You can't just take it off easily if needed since there is no plug. Wires are permanently attached and would need to be cut. Fortunately I've never had to remove it. It's on a 35 inch tire with an 18 inch wheel.This light works great! I added larger tires and didn't want to have the original stick up. So I added this and it serves the purpose well! You will be cutting into the vehicles factory wiring to install this product. If you are ok with and familiar with wiring, then this will be VERY easy to install. It is LITERALLY a plastic disc with and LED rope placed behind a smoked or tinted clear plastic cover. It mounts into existing factory installed spare tire mounts and then the spare fireflies in front of it. The open portion of the wheel design will allow for either the red LED glow and/or the roped diodes to show through. The more solid your wheels are the less chance of showing the round diodes themselves, but they are bright and I'm sure you will at least get the glow around the tire. I recommend using a piece of double sided tape or similar adhesive to secure the disc fight against the spare mount. Otherwise, it is so light, that it will flop around until you put the wheel in front of it, making installation a little harder. 100% satisfied customer.Considering it's easy to spend double this price on a competitor, I came in with low expectations. When I opened the box, I was pleasantly surprised. Fit and finish are good, and cutting two wires for install is easy. Plenty of slack in the wires.What I would suggest is for the instructions to give alternatives to electrical tape. At the same time, I think people willing to cut into their car's wiring should know there are better options for sealing from moisture.I really like the look of this light, and it's nice to get a little bit of my rear view back by removing the original 3rd brake light. It seems plenty bright enough for people to recognize. My only complaint is it seems cheap, like it should have cost half what it did. It would be nice if they included some retaining clips to hold it in place, so it's not relying 100% on the wheel to stay put. For the price, they also should have included some wiring connectors to attach it to the factory wiring. I question the long-term durability of it. I bought it for the look and to get rid of the original light, and it accomplishes that. For that reason I will be keeping it and am content.After installing a Smittybilt HD spare tire carrier I searched for something to replace the factory light. This is the solution. It does not block the rear window of my Jeep any further than the oversized tire and give much more light. With the smoked cover over the LEDs it is practically invisible when the brake light is not illuminated. Easy to install, serves its purpose well. 32 Pieces Sublimation Patch Blanks 4 Shapes Iron-on Hat Patch Fa Automotive => Lights Lighting Accessories => Lighting Assemblies Accessorie

Diventa subito Blogger Invia un diario e unisciti alla nostra comunità adesso!

Alcune idee per i tuoi Viaggi

Loading…

Hot Sale At Prices 32 Pieces Sublimation Patch Blanks 4 Shapes Iron-on Hat Patch Fa Shop Online

home
32 Pieces Sublimation Patch Blanks 4 Shapes Iron-on Hat Patch Fa
32 Pieces Sublimation Patch Blanks 4 Shapes Iron-on Hat Patch Fa

  • Package includes: 32 pieces of sublimation blank patches in this package, available in 4 shapes, round shape, 2 kinds of rectangle shapes, badge shape, sufficient quantity and different shapes to meet your daily use or sharing needs
  • Comfortable and sturdy: made of quality polyethylene, these iron-on fabric blanks are designed with hot melt adhesive on the back, comfortable to the touch and sturdy to use; Heating with an iron can combine the patch with clothes, please do not use hair straighteners or other heating objects
  • DIY in your way: these black frame sublimation repair patches can help you DIY any pattern you like, such as landscapes, letters or the photo of pet, which can bring different styles and colors for these patches, bringing you so much DIY fun
  • Wide applications: iron-on blank patches can be applied on clothes, hats, uniforms, blankets, backpacks or other items to create personal style, which can also cover the holes in clothes and hats, repair damaged areas on the knees, elbows pr pockets, both decorative and practical, suitable for kindergartens, campuses, decorate rooms
  • Easy to use: preheat your iron at first, then use the fabric blank patch to cover the hole, please use a little bit of force and put iron over the patch for 60 seconds, hot-melt on the patch is firm, easy to use, making life more convenient
|||

Product description


Features:
Fabric repair patch with blank surface allows you to DIY any patterns you want, bringing you so much DIY fun.
Iron-on sublimation patches are both decorative and practical, which can cover the holes in clothes and hats, also chic decoration for your clothing.
Useful gift for your friends, family or close neighbors, repair blank patches in 4 shapes are sure to win their preference.

How to use:
Preheat your iron at first, then use the fabric blank patch to cover the hole, please use a little bit of force and put iron over the patch for 60 seconds, hot-melt on the patch is firm.

Specification:
Color: as the pictures show
Size: as the pictures show
Material: quality polyethylene

Package includes:
32 x Sublimation blank patches

Note:
Please allow slight size error due to manual measurement.
Please allow slight color difference due to different monitor.